Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads of the Mazda Bongo

Model: Mazda Bongo Brawny MK 5 - Years 2019-2026
Part: Brake pads

Today, let's review the main instructions for removing and replacing the rear brake pads of the Mazda Bongo. First, lift the rear of the vehicle and remove the rear wheel; then, unscrew the bolts of the brake caliper, detaching it from the caliper bracket, as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt; press the caliper piston to retract it, then install the new original brake pads, following the reverse procedure!

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Rear Brake Pads on the Mazda Bongo
Guide to Replacing the Rear Brake Pads on the Mazda Bongo
Mazda Bongo Brawny (1995-2005 / ) Let's briefly go over the main steps to remove and replace the rear brake pads on the Mazda Bongo. First, raise the vehicle at the rear and start rem…
How to Replace the Rear Brake Pads of the Mazda Bongo Brawny
How to Replace the Rear Brake Pads of the Mazda Bongo Brawny
Mazda Bongo Brawny (1995-2005 / ) In today's tutorial, we will see how to remove and replace the rear brake pads of the Mazda Bongo Brawny by following these simple steps. First, lift…
How to Replace the Rear Brakes of the Mazda Bongo
How to Replace the Rear Brakes of the Mazda Bongo
Mazda Bongo Brawny (1995-2005 / ) Today, let's go over the main instructions for removing and replacing the rear drum brakes of the Mazda Bongo. First, lift the rear wheel off the gro…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos