Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Bongo Brawny
    4. : Guide to replacing the rear brake pads of the Mazda Bongo.

Mazda Bongo Brawny - Video tutorial

Model: Mazda Bongo Brawny - Years 1995-2005
Part: Brake pads
Operation: Guide to replacing the rear brake pads of the Mazda Bongo.

Let's briefly go through the main steps that will allow us to disassemble and replace the rear brake pads of the Mazda Bongo. First, we lift the car on the rear side and start by removing the wheel. Then, we unscrew the fastening screws of the rear brake caliper, removing it from the disc and the support, as shown in the video. At this point, we remove the old brake pads, cleaning the caliper from any residual dirt. We apply pressure on the caliper piston to retract it, thus installing the new rear brake pads!


Posted on 11 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos