Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Wiper Blade on a Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

To change the rear wiper blade, start by removing the cover that conceals the nut of the rear wiper arm. Now, lift the arm and the wiper blade, rotate the blade, and by moving it to the left and down, remove it. Next, take the new wiper blade, preferably of the same size, and fit the adapter if necessary.

Insert the new blade into the slot of the old blade, locking it in place to the right and upwards.

At this point, position the blade in the same direction as the arm, lower the rear wiper arm, and replace the cover that conceals the nut. Finally, test the new wiper blade by spraying water from the washer.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade of a Mazda CX-5 (2013)
How to Replace the Rear Wiper Blade of a Mazda CX-5 (2013)
Mazda CX-5 (2012-2017 / MK 1, KE) Today, I will explain how to replace the rear wiper blade of a Mazda CX-5. When the rubber profile wears out or detaches, it is necessary to replace …
Replacing the Rear Wiper Blade on a Mazda CX-5
Replacing the Rear Wiper Blade on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today, let's go through the steps necessary to remove and replace the rear wiper blade on the Mazda CX-5. First, move to the rear and start by removi…
How to Replace the Rear Wiper on the Mazda CX-5
How to Replace the Rear Wiper on the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide shows how to remove and replace the rear wiper on the Mazda CX-5. First, move to the back of your car and lift the wiper arm; then rota…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos