Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Wiper Blade on a Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

Today, let's go through the steps necessary to remove and replace the rear wiper blade on the Mazda CX-5. First, move to the rear and start by removing the small plastic cover found at the base of the wiper arm; then, rotate the rear wiper blade and detach it from the arm for removal, as shown in the video.

At this point, install the new rear wiper blade of the correct type and size; secure it properly before lowering the wiper arm!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Mazda CX-5 (2017-2024 / MK 2) Today, in this video tutorial, see how to remove and replace the rear wiper blade of the Mazda CX-5. First, move to the back of your car and start by…
Mazda CX-5 (2012-2017 / MK 1, KE) To change the rear wiper blade, start by removing the cover that conceals the nut of the rear wiper arm. Now, lift the arm and the wiper blade, rotat…
Mazda CX-5 (2012-2017 / MK 1, KE) Today, I will explain how to replace the rear wiper blade of a Mazda CX-5. When the rubber profile wears out or detaches, it is necessary to replace …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos