Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blade Rubber on the Mazda CX-8?

Model: Mazda Cx 8 KG - Years 2017-2024
Part: Windshield wipers

You can replace just the rubber profile of the wiper blade instead of the entire blade, which saves you money. Here’s how to do it: lift the wiper arm and locate the small button in the center of the blade that you need to press to release the blade. At this point, you can remove the blade. On the end of the blade, there is a plastic finishing piece that needs to be removed with a small screwdriver; apply pressure to unlock the clip that holds it in place, then you can slide the rubber profile off the blade and insert the new profile. Reattach the plastic end of the blade and reattach the blade to the arm.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Center Display of the Mazda CX-8
How to Replace the Center Display of the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to disassemble and replace the center display of the Mazda CX-8's radio, following the instructions below.…
How to Replace the Cabin Filter in the Mazda CX-8?
How to Replace the Cabin Filter in the Mazda CX-8?
Mazda Cx 8 (2017-2024 / KG) Replacing the cabin filter in the Mazda CX-8 is an extremely simple and quick operation. Let's see how to proceed in this tutorial. First, sit in the…
Removing the Radio from the Mazda CX-8
Removing the Radio from the Mazda CX-8
Mazda Cx 8 (2017-2024 / KG) In this video tutorial, you will learn how to remove the factory radio from the Mazda CX-8 in simple and quick steps. First, get inside the vehicle a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos