Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on Mazda 3

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Headlight bulb

In this new mini guide of ours we are going to explain to you in detail how to replace the bulb in the front light of your Mazda 3 first series (year 2008). First turn off the car and park it safely. Then lift the front hood and disconnect the electrical pin located inside the engine compartment. Then remove the protective cap from the headlight and replace the old bulb with the new one. Finally, put the cap back on and reconnect the electrical pin. Close the hood of the car and the procedure is finally concluded successfully.

Posted on 27 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace spark plugs on Mazda 3?
How do you replace spark plugs on Mazda 3?
Mazda 3 (2003-2009 / MK 1, BK) To be able to replace the spark plugs on the Mazda 3, you need to go and open the bonnet, so that you can access the components inside the engine com…
How to replace the outside door handle on Mazda 3
How to replace the outside door handle on Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) Today's guide will show you how to disassemble and replace your Mazda 3 exterior door handle by following the instructions below. First we open the f…
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Mazda 3 (2003-2009 / MK 1, BK) To replace the bulb, you need to remove the headlamp and detach the front bumper to access the mounting pins: one is located at the lower left corner…

Other guides you may be interested in

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos