Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Warning light – error code

In today's video, see how to reset the service light on the Mazda CX-5. This tutorial may also apply to other models from the Japanese manufacturer with the same reset system. First, ensure regular maintenance is performed as recommended by the manufacturer and detailed in the vehicle's manual. Once done, start the car and navigate to the central menu selection. Locate the correct parameter and proceed to reset it. Wait for confirmation, then you can turn off the vehicle and continue driving as normal.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mazda CX-5?
How to Reset the Service Light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) .. In this tutorial, you can see how to reset the service light on the Mazda CX-5, a very simple and quick operation that should only.. …
How to Reset the Service Light on a Mazda CX-5?
How to Reset the Service Light on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, you will learn how to reset the service light on a Mazda CX-5, a very simple and quick operation to perform only after completing a…
How to Reset the Service on the Mazda CX-5?
How to Reset the Service on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) In this tutorial, you will see how to reset the service on the Mazda CX-5, a very simple and quick operation to perform only after completing all sch…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos