Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter in the Mazda CX-3?

Model: Mazda Cx 3 MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

Video tutorial

Replacing the diesel filter in the Mazda CX-3 is a very simple and quick operation; let's see how to proceed in this tutorial. First, ensure that the engine is sufficiently cool, then open the bonnet and locate the filter in question, positioned to your left.

Next, disconnect the two connectors above it, undo the first fastening bolt with a 13mm socket, and then with a 10mm socket, undo the second bolt. At this point, remove the entire support, disconnect the pipes, and proceed with fitting the replacement.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Mazda CX-3
Replacing the Diesel Filter on the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) This guide briefly outlines the procedure to remove and replace the diesel filter on the Mazda CX-3 in simple steps. First, raise the vehicle and loc…
How to Replace the Air Filter on a Mazda CX-3
How to Replace the Air Filter on a Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) In this video tutorial, you will see how to replace the air filter on a Mazda CX-3 by following a few simple steps: first, purchase a new air filter;…
How to Reset the "Service" Light on a Mazda CX3
How to Reset the "Service" Light on a Mazda CX3
Mazda Cx 3 (2015-2023 / MK 1) Before you can start, sit in the driver’s seat of your Mazda CX3 and activate the instrument panel. Begin by selecting and confirming the "Applicatio…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos