Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

Installing LED interior lights will give the car a much more modern and appealing look while also improving internal visibility. Before proceeding with the bulb replacement, obtain a plastic lever to detach the covers of the light fittings without damaging them, and a pair of needle-nose pliers to extract and insert the bulbs, as the metal tabs are quite rigid.

Start with the light fittings in the headlining by detaching the covers and replacing the bulbs (this LED model does not have a polarity to observe). To replace the number plate and reverse lights, remove the trim from the boot.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Installing LED Interior Lights
Installing LED Interior Lights
Mazda 3 (2009-2013 / BL, MK 2) Replacing the interior lights with LED ones will give the vehicle a much more modern and appealing look while improving visibility. The replacement i…
Installation of LED Front Headlights
Installation of LED Front Headlights
Mazda 3 (2009-2013 / BL, MK 2) Replacing the bulbs in the front headlights with LED ones is a good solution as these lamps not only give the vehicle a more modern and appealing loo…
Instructions for Installing LED Headlights
Instructions for Installing LED Headlights
Mazda 3 (2009-2013 / BL, MK 2) Replacing the front headlight bulbs with LED types will greatly improve night visibility while making the front of the vehicle look much more modern …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos