Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Bonnet

Model: Mazda Cx7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Body

Video tutorial

To remove the bonnet, simply unscrew the mounting pins that attach the bonnet to the respective support hinges: it is advisable to perform this operation with two people, one on each side of the bonnet, to support it during the removal process; open the bonnet and locate the mounting pins at the rear hinges, then support the bonnet and proceed to unscrew the pins to free the bonnet from both sides and remove it from its position, taking care not to damage anything during this phase.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Mazda Cx7 (2006-2012 / MK 1) First, move the gear lever back to facilitate the removal process. Using a small plastic lever, detach the trim around the car radio and climate cont…
How to Replace the Diesel Filter on a Mazda CX7
How to Replace the Diesel Filter on a Mazda CX7
Mazda Cx7 (2006-2012 / MK 1) Before you can start, open the front bonnet of your Mazda CX7. Begin by unscrewing the screws that secure the support brackets of the diesel filter. …
Instructions for Removing the Intercooler
Instructions for Removing the Intercooler
Mazda Cx7 (2006-2012 / MK 1) The intercooler, or charge cooler, is a heat exchanger of the air/air or air/water type, which cools the air entering the engine to ensure it is at t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos