Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to reset the oil light on Mazda 3.

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: -board computer
Operation: How to reset the oil light on Mazda 3.

If the oil has been changed on a Mazda 3 but the warning light remains on, to reset it simply follow these simple instructions. Get into the car, close all doors, press and hold both the brake and accelerator pedals simultaneously, and turn on the instrument panel. Wait about twenty seconds, still holding both pedals down, until the oil warning light starts flashing. Turn off the panel and only then release the pedals. If everything has been done correctly, when turning the panel back on, the warning light should have turned off.


Posted on 16 May 2023 by ScegliAuto



How to reset the oil warning light in the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) In today's video we see how to reset the engine oil warning light in the Mazda compact, or the 3. First of all, we recommend carrying out this operat
How to reset the Mazda 3 engine oil service light
Mazda 3 (2013-2019 / MK 3, BN, BM) Let's see below the guide on how to reset the Mazda 3 oil change service light. First of all, we get on board the car and start turning on the instru
How to reset the Mazda 3 MK2 service light
Mazda 3 (2009-2013 / MK 2, BL) Let's see in this short and simple guide the procedure necessary to reset the service light of the ordinary maintenance of the oil change of the Mazd

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos