Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 7
    4. : Front headlight disassembly instructions

Mazda Cx 7 - Video tutorial

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Headlight
Operation: Front headlight disassembly instructions

In order to remove the front headlight, the bumper must first be removed as the headlight is undercut with respect to the bumper itself; therefore open the front bonnet and start by removing the pressure fasteners that secure the upper band of the bumper to the bonnet cross member; then move on to the wheel arches and the screws present along the lower band of the bumper; once the bumper has been removed, the headlight can be disassembled by unscrewing the relative fixing pins (one on the internal edge and the other on the outside) and removing the pressure stop applied on the inner edge of the mudguard; once the headlight is released, pull it forward just enough to disconnect the sockets and complete the disassembly.


Posted on 5 September 2023 by ScegliAuto



Rear light disassembly instructions
Mazda Cx 7 (2006-2012 / MK 1) The removal of the rear light on this model of car is quite simple to carry out: once the rear hood has been opened, intercept the cap on the inner l
Front wheel hub disassembly instructions
Mazda Cx 7 (2006-2012 / MK 1) If you hear a noise coming from the front wheel which is accentuated especially when cornering, then the bearing in the center of the hub has certain
Front shock absorber disassembly instructions
Mazda Cx 7 (2006-2012 / MK 1) In order to disassemble the front shock absorber it would be advisable to lift the car on a bridge but it is also okay to use car stands; once the ca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos