Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Bumper Beam

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Front bumper

Video tutorial

To remove the front bumper beam, you must first take off the front bumper: open the front bonnet and remove the clips by extracting the central pin and the fixing screws along the edge of the wing and the lower fascia. Once the front bumper is removed, proceed to detach the fixing pins of the bumper beam from the chassis, then remove the central reinforcement rib. After all pins are removed, you can also take off the complete beam with the polyurethane cover, which serves as a damper.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Removal of Rear Impact Absorber Beam
Removal of Rear Impact Absorber Beam
Mazda Cx 7 (2006-2012 / MK 1) To remove the impact absorber beam located under the rear bumper, you must first remove the bumper itself. Start by removing the rear lights to acces…
Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
Mazda Cx 7 (2006-2012 / MK 1) To remove the front headlight, you must first remove the bumper as the headlight is positioned underneath it; open the front bonnet and start by remo…
Removing the Plastic Engine Cover
Removing the Plastic Engine Cover
Mazda Cx 7 (2006-2012 / MK 1) To remove the plastic cover applied directly to the engine, first, extract the two expansion clips at the front ends that secure the cover to the sla…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos