Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Bumper

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: Front bumper

To remove the front bumper, start by opening the front bonnet and extracting the clips at the ends of the grille. Then move on to the clips that secure the wheel arches to the bumper and remove the fixing screw at the edge of the bumper to the wing. Next, remove the pins along the lower edge of the bumper (pins with an 8 mm and 10 mm socket). Finally, remove the last screws and clips securing the upper edge of the bumper to the grille and complete the removal by pulling it forward.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
Mazda Cx 7 (2006-2012 / MK 1) To remove the front headlight, you must first remove the bumper as the headlight is positioned underneath it; open the front bonnet and start by remo…
How to disassemble the front headlight of the Mazda CX-7
How to disassemble the front headlight of the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) The following steps will show us how to disassemble and replace the front headlight of the Mazda CX-7. First, we open the hood of the car and start u…
Instructions for Removing the Bumper Beam
Instructions for Removing the Bumper Beam
Mazda Cx 7 (2006-2012 / MK 1) To remove the front bumper beam, you must first take off the front bumper: open the front bonnet and remove the clips by extracting the central pin a…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos