Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Dash Cam on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

See other generations:
Video tutorial

Follow this guide for the main instructions to install the Dash Cam on the Mazda CX-5, following these simple steps. First, get into the vehicle and position the Dash Cam behind the rear-view mirror, attached to the windscreen; then, connect the power cable to the USB port, routing the wiring preferably behind the side pillars (using a thin plastic trim tool to detach and remove them), as shown in the video.

At this point, configure your Dash Cam!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Mazda CX-5 (2017-2024 / MK 2) Today, in this video tutorial, see how to remove and replace the rear wiper blade of the Mazda CX-5. First, move to the back of your car and start by…
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide will illustrate the steps to remove and replace the serpentine belt on a Mazda CX-5 2.5L Skyactiv. First, lift the vehicle and begin by…
Mazda CX-5 (2012-2017 / MK 1, KE) Today's guide shows how to remove and replace the rear wiper on the Mazda CX-5. First, move to the back of your car and lift the wiper arm; then rota…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos