Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Location and Diagram for the Mazda Bongo

Model: Mazda Bongo Brawny - Years 1995-2005
Part: Fuse box

In this brief and simple guide, we will go through the main steps to locate the internal fuse box and the fuse diagram for the Mazda Bongo. First, locate the internal fuse box on the driver's side (remove the plastic cover found at the bottom), as shown in the video. At this point, take the owner's manual to find the fuse diagram; there is another fuse box in the engine compartment, where you can replace any blown fuses with new ones of the same amperage!

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Mazda Bongo
Where to Find the Fuse Box of the Mazda Bongo
Mazda Bongo Brawny (1995-2005 / ) If you are experiencing any malfunction in one or more electrical components of your Mazda Bongo Brawny and need to check the fuses, then this guide …
How to Replace the Timing Belt on a Mazda Bongo
How to Replace the Timing Belt on a Mazda Bongo
Mazda Bongo Brawny (2019-2026 / MK 5) To replace the timing belt on a Mazda Bongo, open the hood to access the left side of the engine block. Here, you will find the belt routed around th…
Replacing the Rear Brake Pads of the Mazda Bongo
Replacing the Rear Brake Pads of the Mazda Bongo
Mazda Bongo Brawny (2019-2026 / MK 5) Today, let's review the main instructions for removing and replacing the rear brake pads of the Mazda Bongo. First, lift the rear of the vehicle and …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos