Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 30
    4. : How to reset the service light on the Mazda CX-30?

Mazda Cx 30 - Video tutorial

Model: Mazda Cx 30 MK 1, - Years 2019-2024
Part: Checks and maintenance
Operation: How to reset the service light on the Mazda CX-30?

In this tutorial, we can see how to reset the service light in the Mazda CX-30, an extremely simple and quick operation, to be performed only after completing all the required scheduled maintenance work. First of all, we insert the key and turn on the instrument panel, then we press the "Home" button located in the central console and go to the "Information" section. Next, we enter "Vehicle Status Monitor", "Vehicle Maintenance Settings", and select "Reset Oil Change Distance". Once the reset is confirmed, we restart the vehicle to verify that the operation has been successful.


Posted on 22 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Cx 30 2019-2026 - What are the warning lights on the Mazda CX-30? Read Answer
    • Cx 30 2019-2026 - How much does the Mazda CX30 service cost? Read Answer
    • Cx 30 2019-2026 - What does a TPMS malfunction on Mazda CX 30 indicate? Read Answer
    • Cx 30 2019-2026 - When should the Mazda CX 30 be serviced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos