Do it yourself
Frequently asked questions about cars and motorcycles

Coil Replacement and Intercooler Cleaning

Model: Mazda Cx 7 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Ignition coil

Video tutorial

Lift the bonnet and use a plastic lever to lift the two "buttons" that hold the panel covering the intercooler on your engine. Also disconnect the various pipes connected to the engine using clips.

Unscrew the bolts that secure the intercooler to the chassis to fully lift it. Now it will be very simple; unscrew the bolts on each coil to secure it, disconnect the connectors, and remove the entire coil. Replace it with the new one and follow all the previous steps in reverse to reassemble everything.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Mazda Cx 7 (2006-2012 / MK 1) Changing the filter in your car is a very important operation as it allows the ventilation system to breathe much better. It is important to replace …
Mazda Cx 7 (2006-2012 / MK 1) Replacing the number plate bulbs is very simple and does not require removing any trim. Open the rear bonnet to access the bulb holder more easily. P…
Mazda Cx 7 (2006-2012 / MK 1) Replacing the oil in the gearbox is a maintenance task that is often overlooked, and indeed many car manufacturers do not specify any maintenance; ho…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos