Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How to remove the AdBlue warning light in the Mazda CX-5?

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 2 - Years 2017-2023
Part: Checks and maintenance
Operation: How to remove the AdBlue warning light in the Mazda CX-5?

If the AdBlue warning light has come on in our Mazda CX-5, it means that the coolant level is too low and, consequently, it will need to be topped up. This is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, let's buy a can of urea at any auto parts store, then make sure the engine is off and open the fuel door. Then unscrew the blue cap, insert the can's tube into the hole and pour in the necessary amount of liquid to reach the maximum level.


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Cx 5 2012-2017 - What are the indicators of the Mazda CX-5? Read Answer
    • Cx 5 2012-2017 - What problems does the Mazda CX-5 bluetooth connection have? Read Answer
    • Cx 5 2012-2017 - What are the warning lights of the Mazda CX-5? Read Answer
    • Cx 5 2017-2023 - What are the warning lights of the Mazda CX-5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos