Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service warning light on the Mazda 6.

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Service warning light

Through this procedure, we will see the steps on how to reset the service light for the regular maintenance of the engine oil change on the Mazda 6. First of all, we get on board the vehicle and turn on the instrument panel; then we go to the car settings; then we go to the service section and follow the guided procedure to reset the light from the instrument panel, as shown in the video. At this point, the service kilometers will be reset, therefore indicating the mileage on the display before the next service!

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Mazda 6
How to Reset the Service Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) To reset the service light on a Mazda 6, get into the vehicle and turn on the instrument panel and multimedia system without starting the engine. Use…
Resetting the service light on the Mazda 6 MK3
Resetting the service light on the Mazda 6 MK3
Mazda 6 (2012-2024 / GJ, MK 3) In this video, we see that the appearance of an orange wrench-shaped warning light on the instrumentation of the Mazda 6 MK3 reminds us that we are a…
How to reset the maintenance light on the 2019 Mazda 6
How to reset the maintenance light on the 2019 Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) If the maintenance light on the instrument panel of your Mazda 6 (2019) continues to appear despite having already performed the regular service, the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos