Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mazda CX 3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Service warning light

Resetting the service light of a Mazda CX 3 vehicle is simple. This operation must be performed after each car service. The first thing to do is to insert the key and turn it to the "on" position while keeping the selector button on the dashboard pressed, and then turn on the instrument panel. The second thing to do is to press and hold the selector button for more than 5 seconds, and only after the light starts flashing and then goes off, the reset will be completed. Turn off the instrument panel and turn it back on to verify that the reset operation was successful. If not, you can try the process again.

Posted on 11 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Mazda CX3
How to Reset the "Service" Light on a Mazda CX3
Mazda Cx 3 (2015-2023 / MK 1) Before you can start, sit in the driver’s seat of your Mazda CX3 and activate the instrument panel. Begin by selecting and confirming the "Applicatio…
How to reset the "Service" indicator on a Mazda CX-3?
How to reset the "Service" indicator on a Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) To reset the "Service" light on a Mazda CX-3, turn on the instrument panel without starting the engine. Use the buttons located on the center console…
How to Reset the Service Light in a Mazda CX-3?
How to Reset the Service Light in a Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) As shown in this tutorial, resetting the service light in a Mazda CX-3 is a very simple and quick operation. Before proceeding, ensure that you have …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos