Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on Mazda CX5/CX9

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Service warning light

In this video we see how to reset the service light of a Mazda CX5/CX9. The YouTuber had already reset the light, so he will explain it to us verbally. First, we hold down the button/dial located at the top right of the dashboard, which serves as the reset button. We must hold it down until the warning disappears. While holding down the button, we must press the "start" button, and then continue to hold down the button for at least another 10 seconds. If it still does not turn off, press the start button again and wait for another 7/10 seconds. At this point, the warning light will definitely turn off.

Posted on 18 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to perform an oil change on the Mazda CX5
How to perform an oil change on the Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this video tutorial, we will see how to reset the oil light and maintenance light on the Mazda Cx5. This procedure is very simple and quick, and i…
How to Reset the Average Fuel Consumption on a Mazda CX5
How to Reset the Average Fuel Consumption on a Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) The average fuel consumption indicator located on the dashboard of your Mazda CX5 is very important and provides an accurate idea of the car's fuel c…
Tire pressure reset on a Mazda CX5
Tire pressure reset on a Mazda CX5
Mazda CX-5 (2012-2017 / MK 1, KE) Thanks to this very short and useful video guide today we can see the entire procedure necessary to reset the tire pressure warning light on a first …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos