Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel Bearing of a Mazda 6

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Bearing

In this video, see how to remove the wheel bearing from a Mazda 6. First, position your car on a column lift, loosen the bolts with a telescopic spanner, and raise the car to your preferred height. Remove the bolts and take off the wheel, then start unscrewing the bolts of the caliper bracket and detach it. Unscrew the bolts of the brake disc and detach it from the wheel hub, then use pliers to pull off the central hub cap. Loosen the large bolt with a socket wrench and remove the part. Compare the two bearings; you will see a clear difference between them. Now, fit the new bearing onto the wheel hub and reassemble all the other parts in reverse order.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace a Wheel Bearing on a Mazda 6
How to Remove and Replace a Wheel Bearing on a Mazda 6
Mazda 6 (2002-2008 / MK 1, GG) In this video, we will see how to remove a wheel bearing from a Mazda 6. Position your car on a column lift, loosen the bolts with a socket wrench, a…
Replacement of Front Wheel Bearing
Replacement of Front Wheel Bearing
Mazda 6 (2002-2008 / MK 1, GG) Lift the vehicle, secure it, and remove the wheel. Disassemble the entire brake assembly to free the shaft. Remove the brake disc, starting by taking…
Replacement of the V-belt
Replacement of the V-belt
Mazda 6 (2002-2008 / MK 1, GG) This video tutorial shows the procedure to remove and replace the worn V-belt of a Mazda 6. To gain better access to the belt, you need to remove the…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos