Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Mercedes Vari
    4. : Antifreeze coolant

Mercedes Mercedes Various - Antifreeze coolant

Antifreeze Coolant Mercedes Mercedes Various ( / )

Mercedes Mercedes Various
How to Top Up the Coolant in a Mercedes
The coolant, also known as antifreeze, is a mixture of water and ethylene glycol with special additives that helps maintain the engine temperature under …Read all…
Posted on 9 March 2026 by ScegliAuto
Mercedes Mercedes Various
How to check the level of coolant on a Mercedes
In this video we will see how to check the level of coolant on a Mercedes car: first of all it is important to know that you should always open the cap of the …Read all…
Posted on 18 May 2024 by ScegliAuto
Alternator (2) Antenna (1) Car stereo (1) Battery (6) Transmission (14) Spark plugs (1) Body (4) Key (47) Timing belt (4) Onboard computer (7) Checks and maintenance (25) Dashboard (1) Headlight (3) Air filter (1) Cabin air filter (1) Diesel fuel filter (1) Grille (1) Fuel injectors (1) Window switch (3) Light bulb (2) Headlight bulb (3) Antifreeze coolant (2) Handle (1) Starter motor (1) Engine oil (2) Clock (9) Door trim panel (2) Front bumper (1) Tires (2) Instrument cluster (8) Wheel (2) Fuse box (10) Seat (2) Side mirror (1) AdBlue warning light (3) Warning light – error code (18) (5) Tire pressure warning light (4) Service warning light (12) Manufacturer emblem (5) Engine mount (1) Fuel cap (2) Windshield wipers (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos