Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Starter motor

See other generations:
Video tutorial

Today's main information will show you how to remove and replace the starter motor on the Mercedes A-Class. First, open the hood and start disassembling and removing the air intake manifold; then disconnect the various high-pressure hoses, gaining access to the starter motor located underneath, as shown in the video.

At this point, unscrew the mounting bolts of the starter motor to remove it, disconnecting the electrical wiring; then replace and install the new starter motor, following the video tutorial to the end!


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Starter Motor on the Mercedes A-Class
Guide to Replacing the Starter Motor on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. will find the main instructions for removing and replacing the starter motor on the Mercedes A-Class. First, open the hood of the vehicle and begin disconnecting.. …
Guide to Replacing the Starter Motor on the Mercedes A-Class
Guide to Replacing the Starter Motor on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) ..nd replace the starter motor on the Mercedes A-Class. To access the starter motor, you will need to remove the entire engine block from the chassis b.. …
How to Replace the Starter Motor on a Mercedes A-Class?
How to Replace the Starter Motor on a Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. To replace the starter motor on a Mercedes A-Class, open the hood to access the components in the engine compartment. Locate the starter motor at.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos