Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Starter Motor on the Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Starter motor

See other generations:
Video tutorial

In this guide, you will find the main instructions for removing and replacing the starter motor on the Mercedes A-Class. First, open the hood of the vehicle and begin disconnecting the air intake hose, then remove the air filter box. Next, disassemble the entire intake duct by disconnecting the hoses located underneath, as shown in the video.

At this point, remove the engine oil filter and unscrew the starter motor mounting bolts, disconnect the wiring to remove it and replace it with the new original one!


Posted on 17 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2004-2012 / W169) .. and replace the starter motor on the Mercedes A-Class. First, open the hood of the vehicle and disconnect both battery terminals; then, remove the screws.. …
Mercedes Classe A (2012-2018 / W176) .. and replace the timing belt on the Mercedes A-Class with a Renault engine. First, open the hood of your car and begin to remove the timing belt cover;.. …
Mercedes Classe A (1997-2004 / W168) .. the exterior rearview mirror on the Mercedes A-Class. First, approach the rearview mirror and start by disengaging the mirror glass from the rear support,.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the cooling fan fuse located on the VW Touran?

The fuse for the engine cooling fan on Volkswagen Touran vehicles is located inside the fuse box in the engine bay. The fuse box is specifically mounted near the battery, on the left side of the vehicle. To replace the fuse, open the bonnet and then the cover of the fuse box by releasing the clips. The cover has a diagram of the fuses contained within. The fuse in question is labelled F8 and is 10 Amperes. Remove the fuse and insert the new one, then close the fuse box cover and the bonnet.

Watch the video!


by ScegliAuto

More videos