Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Oil Filter on a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Oil filter

See other generations:
Video tutorial

Replacing the oil filter on a Mercedes A-Class? Let's see how to replace the filter. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the hood and secure it. Remove the ventilation hose, then use a socket wrench to unscrew the large securing bolt of the cap where the oil filter is located.

Remove the worn oil filter and install a new one. Top off with new oil and close the hood after reinstalling the air hose that was removed earlier.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Mercedes A-Class
How to replace the engine oil and oil filter of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the oil and oil filter of the Mercedes Classe A model W 169. We begin the oil replacement by opening the front hood and removing the oil filter.. …
How to Replace Engine Oil and Oil Filter on the Mercedes A-Class W176
How to Replace Engine Oil and Oil Filter on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the engine oil and oil filter on the Mercedes A-Class W176. First, lift the vehicle and start by removing the oil drain plug located under the engine.. …
Where is the engine oil filter located on the Mercedes A-Class?
Where is the engine oil filter located on the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. The oil filter on a Mercedes A-Class vehicle is located under the hood, specifically right behind the engine, covered by a protective.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos