Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

In today's tutorial video, you will learn how to perform routine maintenance by replacing the engine oil and oil filter on the Mercedes A-Class W176. First, lift the vehicle and start by removing the oil drain plug located under the engine using a socket wrench; let it drain into a container for about ten minutes.

At this point, use the oil filter wrench to unscrew the oil filter; you will find it at the bottom of the engine compartment, as shown in the video.

Finally, replace the air filter and pour in the new oil!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Perform a Service on the Mercedes A-Class W176
How to Perform a Service on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. maintenance oil change service on a Mercedes A-Class W176. First, lift the vehicle to drain the old engine oil: then remove the lower plastic cover.. …
How to Change the Engine Oil of the Mercedes A-Class?
How to Change the Engine Oil of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) To change the engine oil of the Mercedes A-Class, lift the car with a lift or jack to access the underside of the engine compartment: here you will f…
Where to Find the Engine Air Filter on a Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. this guide for all of you who own a Mercedes A-Class W176, we will explain how to safely access the engine air filter. First, turn off the vehicle completely.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - What is the right amount of engine oil for the Mercedes A-Class W176? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos