Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil of the Mercedes A-Class, lift the car with a lift or jack to access the underside of the engine compartment: here you will find the protection panel that needs to be removed by unscrewing its fastening screws. At this point, you can unscrew the oil drain plug, collecting the used oil in a properly positioned container.

Once the oil has fully drained, open the hood to remove the oil filter, located next to the dipstick; after replacing the filter, you can insert the new oil into the designated filler in the engine compartment.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Change the Oil on the Mercedes A-Class W169?
How to Change the Oil on the Mercedes A-Class W169?
Mercedes Classe A (2004-2012 / W169) .. and of course the oil filter, on a Mercedes A-Class W169. First, open the hood and unscrew the oil filler cap, then lift the car and secure it. Locate.. …
How to Perform a Service on the Mercedes A-Class W176
How to Perform a Service on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. maintenance oil change service on a Mercedes A-Class W176. First, lift the vehicle to drain the old engine oil: then remove the lower plastic cover.. …
Where is the engine oil filter located on the Mercedes A-Class?
Where is the engine oil filter located on the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. The oil filter on a Mercedes A-Class vehicle is located under the hood, specifically right behind the engine, covered by a protective.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - What is the right amount of engine oil for the Mercedes A-Class W176? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos