|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Filter in the Mercedes A-Class W169
Model: Mercedes Classe A
W169
- Years 2004-2012
For the Mercedes A-Class CDI W169, start by lifting the car to easily access the drain plug. In the video, you can see the positioning on the lift and then access from below: loosen the oil pan plug and let the used oil drain into a container, waiting for the flow to stop before closing it. Once the undercarriage work is done, move to the engine compartment for the oil filter, which is a cartridge type inside a housing with a cap. Unscrew the cap and remove the old cartridge, which is shown up close. On the workbench, prepare the replacement: replace the sealing ring (O-ring) on the cap/support and install the new cartridge, ensuring everything fits back in place without any gaps or misaligned seals. At this point, reinsert and close the filter assembly, then top off with new oil from above.
Posted on 8 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe A
(2004-2012 /
W169)
.. and of course the oil filter, on a Mercedes A-Class W169. First, open the hood and unscrew the oil filler cap, then lift the car and secure it. Locate.. …
Mercedes Classe A
(2004-2012 /
W169)
.. To replace the fuses on a Mercedes A-Class W169, first locate the exact spot where the fuse box is located. Unlike other vehicles where finding.. …
Mercedes Classe A
(2004-2012 /
W169)
Replacing the motor oil on a Mercedes Class A vehicle model W169 is a very simple operation, and is similar to the Mercedes Class B model W245. The s…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.112
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |