Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to service the Mercedes A-Class W176

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Engine oil
Operation: How to service the Mercedes A-Class W176

In the video tutorial we will see the main steps on how to carry out the routine maintenance service of the oil change of a Mercedes A-Class W176. First we lift the car in order to drain the old engine oil: then we remove the lower plastic protection, unscrewing the seven screws present, and we access the oil pan. Now remove the oil vent bolt, unscrewing it with a socket wrench, and let the oil flow out into a container waiting about twenty minutes before screwing it in again. Now let's remove the oil filter, accessing it from the engine compartment, and replace it with the new one; we just have to insert the new oil!


Posted on 20 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe A 2004-2012 - Every how many km should the engine oil of the Mercedes A-Class be changed? Read Answer
    • Classe A 2012-2018 - How many liters of oil are needed for the gearbox on the Mercedes A-Class 180 cdi? Read Answer
    • Classe A 2012-2018 - What is the right amount of engine oil for the Mercedes A-Class W176? Read Answer
    • Classe A 2012-2018 - What does the B5 maintenance service mean for Mercedes-Benz? Read Answer
    • Classe A 2012-2018 - How many liters of engine oil are needed in a Mercedes Classe A180 cdi? Read Answer
    • Classe A 2012-2018 - How much oil is needed for the engine of the Mercedes A-Class 180 CDI? Read Answer
    • Classe A 2004-2012 - Where is the oil cap located on Class A? Read Answer
    • Classe A 2012-2018 - How many liters of oil does the Mercedes A-Class 180d engine contain? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos