Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Car door

How do you remove the door panel (right side) on a Mercedes A-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery terminals located in the engine compartment. Begin the disassembly: use a pry tool to remove the plastic trim at the corner of the window, then remove the plastic around the handle. Use a screwdriver to remove the fastening screws located in the plastic handle. Remove all screws and use the pry tool to detach all the plastic clips securing the door panel. Pull the door panel away with your hands, disconnect any power connectors and release cable. Perform necessary maintenance on the door.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Mercedes A-Class
How to Remove the Front Door Panel of a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. remove the front door panel of your Mercedes A-Class. Using a thin but sturdy tool, start by prying and removing the inserts of the door panel. Once.. …
How to Remove the Door Panel of a Mercedes A-Class
How to Remove the Door Panel of a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. sit in the driver's seat of your Mercedes A-Class. Begin by prying off and removing the door inserts using a flathead screwdriver. Once done, unscrew.. …
How to Replace the Interior Door Handle of the Mercedes A-Class
How to Replace the Interior Door Handle of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. door handle of the front door on the Mercedes A-Class. First, open the front door and start removing the door panel by unscrewing the mounting screws... …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos