Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and how to replace the timing chain of the Mercedes M-Class

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Timing belt

Today's main instructions will show us how and when to replace the timing chain of the Mercedes M-Class; the manufacturer recommends replacing the chain every 180,000 kilometers or 10 years. To replace the timing chain, it is necessary to remove the entire engine block from the chassis, disassembling the engine mounts and disconnecting the transmission; from there it is possible to remove the timing cover to access the chain, as shown in the video. At this point, we remove and replace the chain with the new original one, finally reassembling the engine block!

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on the Mercedes M-Class
How to Replace the Timing Chain on the Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) .. and replace the timing chain on the Mercedes M-Class, engine code OM651. First, open the bonnet of the vehicle and begin to remove the cylinder head.. …
How do you replace the timing chain of the Mercedes M-Class?
How do you replace the timing chain of the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. To replace the timing chain of the Mercedes M-Class, it will be necessary to completely disassemble the components located in the left part of the.. …
How to replace the timing belt of the Mercedes M-Class
How to replace the timing belt of the Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. how to replace the timing belt of the Mercedes M-Class. To perform this operation, we must first remove the air duct pipe. To remove the pipe, we must.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos