Do it yourself
Frequently asked questions about cars and motorcycles

How to Maintain an Automatic Transmission in a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Transmission fluid

See other generations:
Video tutorial

In this video, see how to maintain an automatic transmission in a Mercedes E-Class. First, use specialized equipment to introduce cleaning fluid into the automatic transmission, then begin the transmission cleaning process.

Drain the automatic transmission fluid from the designated drain plug into a suitable disposal container (remove with a socket wrench). Replace the filter, gasket, and new plug, then insert the oil into the vehicle using appropriate machinery.

Finally, check the color of the oil when cold, then check the oil when hot after warming up the engine.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2002-2009 / W211) .. the automatic transmission of the Mercedes E-Class. First, get inside the vehicle and connect your diagnostic tool with the appropriate programming.. …
Mercedes Classe E (2009-2016 / W212) .. the automatic transmission of the Mercedes E-Class, followed by the learning process. To perform a forced reset of the automatic transmission, it.. …
Mercedes Classe E (2002-2009 / W211) .. the automatic transmission of the Mercedes E-Class, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lights up,.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos