Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Indicator on a Mercedes B-Class Side Mirror?

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Side mirror

See other generations:
Video tutorial

To replace the indicator on a Mercedes B-Class side mirror, follow these steps. Start by gently pushing the side mirror in the opposite direction to the vehicle to reveal the gap between the mirror and the bodywork.

Locate the fixing point of the indicator at the back of the mirror and use a flat screwdriver or a similar tool to carefully pry and remove the old indicator. Once the old indicator is removed, disconnect the electrical connector from the back of the indicator.

Now, connect the new electrical connector to the replacement indicator. Ensure that the connector is securely attached and that all contacts are tight.

Next, position the new indicator in the same fixing point of the mirror and press it gently until it clicks firmly into place. Make sure it is well aligned with the side mirror.

Finally, test the new indicator to ensure it works correctly before refitting the side mirror.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2005-2011 / MK 1, W245) In this tutorial, you will learn how to dismantle and repair, or replace, the control cable of the external wing mirror on the Mercedes B-Class. Firs…
Mercedes Classe B (2005-2011 / MK 1, W245) To replace the bulb in the external mirror of the Mercedes B-Class 180, first ensure the vehicle is parked securely on a flat surface or ramp. Positi…
Mercedes Classe B (2005-2011 / MK 1, W245) Replacing the external rear-view mirror of the Mercedes-Benz B-Class model W245 is a very simple task to perform independently. Open the right door a…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos