Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Mercedes C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Mercedes C-Class, turn on the ignition without starting the engine. Locate the button under the instrument panel that accesses the settings.

Press and hold it until the maintenance menu appears. Within the menu, use the same command to scroll and find the option for service reset.

Select it by pressing again and confirm by holding for a few seconds. The system will update the maintenance data and remove the indication from the display.

To ensure the reset was successful, turn off and then turn on the ignition again and check that the warning is no longer visible. This operation ensures that the system is ready to detect the next maintenance interval without residual notifications.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. reset the service light on the Mercedes-Benz C-Class in simple steps. First, get in the vehicle and turn on the instrument cluster; then press and hold.. …
Mercedes Classe C (2014-2021 / W205) .. reset the service light on your Mercedes-Benz C-Class W205 is practically identical to that used in all recent Mercedes models. Below are the steps you.. …
Mercedes Classe C (2014-2021 / W205) .. regular maintenance oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer menu and select.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos