Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery in the Mercedes C-Class Plug-In Hybrid

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

Follow these brief instructions to remove and replace the 12V battery in the Mercedes C-Class Plug-In Hybrid. First, open the trunk and begin removing the floor panel and the central bracket located underneath by unscrewing the fastening screws.

Then, disconnect both battery terminals (positive and negative) and remove the battery from its compartment, as shown in the video. At this point, install the new battery of the correct type and with the same amperage.

Finally, reassemble all other components of the trunk!


Updated on 17 November 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) The following instructions will guide us through the process of disassembling and replacing the instrument cluster of the Mercedes C-Class, in simple…
Mercedes Classe C (2021-2026 / W206) If the remote for the Mercedes-Benz C-Class stops working, the cause may be the battery, which can deplete over time and with use. To replace it, tak…
Mercedes Classe C (2007-2013 / W204) Today we will explain how to replace the battery of the Mercedes C-Class model W204 produced from 2007 to 2013. To perform the battery replacement, w…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos