Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gear shift knob cover of a Mercedes GLK

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shifter boot

Video tutorial

The procedure for replacing the gear shift boot of a Mercedes GLK vehicle is simple and quick. Before starting, if the car has a manual gear shift lever, make sure to put it in "P" (park) and if it is an automatic version, make sure the vehicle is turned off. Proceed to remove the cover of the gear shift lever by lifting it off; the cover may be secured with clips or screws, be careful not to damage the upholstery or clips when removing it. Once the cover is removed, you will see the gear shift boot secured around the base of the lever; it will be secured with a clamp or a ring, rotate it to remove it. Place the new boot around the base of the gear shift lever and put back the previously removed cover.


Posted on 7 March 2025 by ScegliAuto


Related tutorials

How to Unlock the Automatic Gearbox in the Mercedes GLK?
How to Unlock the Automatic Gearbox in the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) In this brief tutorial, you will see how to unlock the automatic gearbox in the Mercedes GLK, an emergency operation to perform if the battery is fla…
How to Change Oil on Mercedes GLK
How to Change Oil on Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) How to change the oil on a Mercedes GLK? Follow these steps for the oil and filter change. Lift the car on a column lift or jack and remove the plast…
How to Change the Battery on a Mercedes GLK
How to Change the Battery on a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) How do you change the battery on a Mercedes GLK? Let's look at the removal and replacement of the battery. Open the front bonnet and locate the batte…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos