Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Radio Disassembly

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Car stereo

See other generations:
Video tutorial

Turn the ignition key to cut power to the radio. Open the ashtray door and remove it forward to access the radio's retaining springs.

Remove the panel cover by prying at the edges with a plastic tool. Using two thin tools, such as flathead screwdrivers, locate the radio's retaining springs underneath and, while prying, pull the radio outward, being careful of the connected wires.

Remove all wiring from the back until the radio is completely extracted.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Removing the Original Car Radio
Removing the Original Car Radio
Mercedes Classe E (1995-2002 / W210) Following simple guidelines, replacing your original car radio is not that difficult. Just insert keys into the sides of the radio to release the int…
Car Radio Repair Instructions
Car Radio Repair Instructions
Mercedes Classe E (2002-2009 / W211) If the volume knob of the car radio and the CD player do not work, there is an electronic issue inside the car radio: to perform this repair, you nee…
Removing Car Radio and Cassette Player for Repair
Removing Car Radio and Cassette Player for Repair
Mercedes Classe E (1995-2002 / W210) To remove the car radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this poi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos