Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Original Car Radio

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

See other generations:
Video tutorial

Following simple guidelines, replacing your original car radio is not that difficult. Just insert keys into the sides of the radio to release the internal clips and pull it out. It is advisable to use keys instead of makeshift tools for the extraction process, as these could damage some components of the radio.

Once the radio is removed from its housing, disconnect the connectors attached to the back and pull them out. Do the same with the antenna by disconnecting the cylindrical black connector.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Car Radio Repair Instructions
Car Radio Repair Instructions
Mercedes Classe E (2002-2009 / W211) If the volume knob of the car radio and the CD player do not work, there is an electronic issue inside the car radio: to perform this repair, you nee…
How to Replace the Car Radio in Your Vehicle
How to Replace the Car Radio in Your Vehicle
Mercedes Classe E (2002-2009 / W211) Removing the car radio from your vehicle is not a difficult task. The steps in this simple guide show how to remove the device to speed up the entire…
Replacing the Car Audio System
Mercedes Classe E (2002-2009 / W211) This tutorial shows how to replace the multimedia system of the Mercedes E-Class with an aftermarket one, starting from removing the aesthetic wood p…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos