Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Metal Emblem from a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Manufacturer emblem

See other generations:
Video tutorial

In this video, we will see how to remove and reinstall the metal emblem from the front hood of a Mercedes C-Class. Lift the front hood and use pliers to rotate the metal fastener as shown in the video (release the piece by rotating it with the pliers).

Once detached, remove the metal piece from its place and prepare to install the new logo: Position the emblem perfectly in the logo holder, push with your hands until the emblem fits perfectly into the holder (tighten with the appropriate lower metal piece).

Finally, check that everything is mounted perfectly.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Manufacturer Emblem from the Mercedes C-Class
How to Remove the Manufacturer Emblem from the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. emblem on the trunk lid of the Mercedes C-Class. First, open the trunk lid and start heating the emblem with a heat gun; then use a thin metal.. …
How to Remove the Emblem from the Mercedes Hood
How to Remove the Emblem from the Mercedes Hood
Mercedes Classe C (2007-2013 / W204) Replace the Mercedes emblem on the hood if damaged. Lift the hood and use needle-nose pliers to squeeze the two metal clips (release the piece by rot…
How to Remove the Rear Manufacturer Emblem on the Mercedes-Benz C-Class
How to Remove the Rear Manufacturer Emblem on the Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the manufacturer emblem on the Mercedes-Benz C-Class. First, move to the rear of your car and use a thin lever to gently pry off the manufacturer emblem... …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos