|
Do it yourself
| |||
| ||||
How do you reset the Service indicator light on the Mercedes C-Class?
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
It will be possible to reset the Service light that appears on the instrument panel of the Mercedes C-Class by turning the ignition key to turn on the instrument panel and then holding down the OK and call answer buttons on the steering wheel. By holding down these buttons, a menu will appear in which you can navigate with the steering wheel controls, selecting the "ASSYST PLUS" option: then you will need to select "Full service" and "Conf. Full service". When the confirmation message appears, you will need to select "Yes", confirming that the Service light has been turned off.
Posted on 18 April 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. To reset the Service light on the Mercedes C-Class, turn on the ignition by turning the key in the ignition switch. Once the instrument panel is on,.. …
Mercedes Classe C
(2014-2021 /
W205)
.. reset the service light on your Mercedes-Benz C-Class W205 is practically identical to that used in all recent Mercedes models. Below are the steps you.. …
Mercedes Classe C
(2000-2007 /
W203)
.. maintenance oil change on a Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition. Next, press the menu button on the steering.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |