Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement Using a Vacuum Extractor

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Engine oil

A quick and practical method to replace engine oil involves using a manual vacuum extractor. The first step is to remove the oil drain plug. Use the appropriate equipment to carefully extract the engine oil by inserting the suction tube into the dipstick tube, then pump to create a vacuum and suck out the oil. Remove the used cartridge from the filter housing and replace it with a new one, also changing the o-ring gasket. Refill with new oil, reinstall the dipstick, and check the correct level on the graduated scale. Do not dispose of used oil in the environment; take it to designated collection centers.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Mercedes A-Class
How to replace the engine oil in the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Replacing the motor oil on a Mercedes Class A vehicle model W169 is a very simple operation, and is similar to the Mercedes Class B model W245. The s…
How to Change the Engine Oil of the Mercedes A-Class?
How to Change the Engine Oil of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) To change the engine oil of the Mercedes A-Class, lift the car with a lift or jack to access the underside of the engine compartment: here you will f…
How to Change the Engine Oil on a Mercedes A140
How to Change the Engine Oil on a Mercedes A140
Mercedes Classe A (1997-2004 / W168) If you need to change the engine oil and oil filter on this car model, the following description provides all the necessary steps and useful instruct…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - What is the right amount of engine oil for the Mercedes A-Class W176? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos