Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change Kit for Mercedes 7-G Tronic

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Transmission fluid

In this video tutorial, you can see how to replace the oil change kit for the Mercedes 7-G Tronic. First, you need to have an oil change kit. Put the transmission in Neutral and the ignition key in position 0. Lift the vehicle on a work platform. Rotate the engine in the engine's rotational direction to find the drain bolt of the torque converter. Unscrew the drain bolt of the converter and drain the ATF oil. Tighten the M8 drain bolt with a torque of 7 lb-ft on the converter. Remove the oil pan and let it drip. Remove the old hydraulic filters. Clean the oil pan; now attach the new gasket and reinstall the oil pan, allowing it to drip. Clean the oil pan again, attach the new gasket, and place the new magnets. The 7-G Tronic transmission requires a high-performance Smart Media hydraulic filter with reduced friction. Use the new high-performance Smart Media hydraulic filter from the MEYLE-ORIGINAL oil change kit. Tighten the oil pan lightly and then follow the torque instructions. Tighten the oil pan with a cross wrench to 3 lb-ft. Tighten the oil pan with a 180-degree rotation above the cross. Reattach the sheet metal support of the screen.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2012-2018 / W176) In this tutorial video, you will see the main steps to perform the routine maintenance oil change service on a Mercedes A-Class W176. First, lift the…
Mercedes Classe A (2004-2012 / W169) These short and simple steps will show us how to reset the maintenance service reminder for the engine oil change of the Mercedes Class A, but also o…
Mercedes Classe A (2018-2026 / W177) Today's instructions will show us the procedure for resetting the service light for routine maintenance of the engine oil change in the Mercedes A-Cl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos