|
Do it yourself
| |||
| ||||
How to remove and install the airbag from a Mercedes C-Class
Model: Mercedes Classe C
W206
- Years 2021-2026
In this video, we will see how to remove and install the airbag on a Mercedes C-Class steering wheel. It is essential to disconnect the car's battery first. At the bottom of the steering wheel, we will find two round holes, one on the left and one on the right; insert the hook into one of the holes and point the tip of the hook towards us. Pull down with some determination: we will feel some resistance and a spring will activate the unlocking mechanism that holds the airbag. Repeat also with the other hole. Now the airbag is free, gently pull it towards us; disconnect the electrical connector of the airbag, and then the one of the horn. The installation is carried out in reverse: connect the horn connector and then the airbag connector; position the airbag correctly (the horn logo should be at the top); push firmly until you hear a clear and distinct "click" from both sides. This indicates that the hooks have closed correctly. We can reconnect the battery.
Posted on 23 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. airbag from the steering wheel of a Mercedes C-Class, loosen the two screws located at the back of the steering wheel using the appropriate hex wrench... …
Mercedes Classe C
(2014-2021 /
W205)
.. for removing the airbag of the Mercedes C-Class involves loosening the screws that secure the airbag to the center of the steering wheel: these.. …
Mercedes Classe C
(2000-2007 /
W203)
.. airbag from the steering wheel of the Mercedes C-Class, you need to loosen the screws that secure the airbag to its housing: these screws are located.. …
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.144
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |