Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you deactivate the passenger airbag on the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Airbags
Operation: How do you deactivate the passenger airbag on the Mercedes C-Class?

In order to deactivate the passenger airbag of the Mercedes C-Class, you need to locate the appropriate airbag connector that is located at the bottom of the seat. This connector must be disconnected and an emulator should be connected to it, as shown in the tutorial. This will allow the passenger airbag to be deactivated, causing the corresponding warning light to illuminate on the instrument panel. By doing this, it will be possible to reactivate the airbag by reconnecting the connector, and the airbag deactivation light will turn off completely.


Posted on 29 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What does the malfunction of the restraint system indicate, in the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - What does the message "front right - fault" mean with the airbag warning light in the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - SRS fault restraint warning light, what does it mean? Read Answer
    • Classe C 2007-2013 - How to turn off SRS warning light on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos