Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Today we will explain how to replace the battery of the Mercedes E-Class model W212. To perform the battery replacement, we need to open the front hood and remove the plastic cover on the battery after removing the cover we remove the red protection of the negative pole.

Using a 13 mm key, we unscrew the bolt on the battery and disconnect the negative terminal using a 10 mm key. Using the same key, we disconnect the positive terminal.

We then remove the battery and insert the new one, which must maintain the same amperage as the previous one, the recommended brand is Odyssey. We connect the positive connector and immediately after the negative connector we fix the bolt on the battery and mount the cover of the negative connector, then we go to the battery cover.


Posted on 3 September 2025 by ScegliAuto


Related tutorials

Mercedes Classe E (2016-2023 / W213) .. To replace the battery in a Mercedes E-Class W213, open the hood using the lever in the passenger compartment. Remove the plastic cover over.. …
Mercedes Classe E (2016-2023 / W213) .. To replace the battery in a Mercedes E-Class, open the hood to access the components in the engine compartment. Here, in the upper right corner,.. …
Mercedes Classe E (2002-2009 / W211) .. remove and replace the battery in a Mercedes E-Class in simple, quick steps. First, open the trunk lid and start removing the floor panel to access.. …

    Frequently Asked Questions

    • Classe E 2009-2016 - Where is the battery of the Mercedes E-Class located? Read answer
    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos