Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the hinges of the sliding tailgate of the Mercedes Vito?

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car door

See other generations:
Video tutorial

In order to replace the hinges of the sliding tailgate of the Mercedes Vito, you will need to open the tailgate in question so that the appropriate hinges are visible: once these have been located, you will need to disconnect the electrical connector located there.

You will then need to loosen the bolts in this position and remove the pins: the new hinges can now be inserted and connected so that you can verify that the sliding tailgate functions correctly even after replacement.


Posted on 20 September 2025 by ScegliAuto


Related tutorials

How to Adjust the Sliding Door of the Mercedes Vito and Viano
How to Adjust the Sliding Door of the Mercedes Vito and Viano
Mercedes Vito (2014-2024 / MK 3, W447) This informative video shows how to adjust the sliding door of the Mercedes Vito W639 (or Viano). It indicates the position of the adjustment plate, …
How to replace the external handle of the sliding door on the Mercedes Vito
How to replace the external handle of the sliding door on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the external handle of the sliding door on the Mercedes Vito, open the door and detach the circular cover located on its side. Once this c…
Replacing the Auxiliary Battery of the Mercedes Vito
Replacing the Auxiliary Battery of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) These brief and simple steps will show you how to remove and replace the auxiliary battery of the Mercedes Vito. First, open the sliding rear door on…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos