Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Mercedes Class B?

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

On the instrument panel of the Mercedes B-Class, it will be possible to completely remove the Service light by turning on the instrument panel, turning the key inside the ignition switch: once the instrument panel is turned on, you will need to press the MENU button on the left side of the steering wheel and navigate inside using the arrows.

At this point, when the option to reset the maintenance interval is found, you will need to hold down the MENU button again until the light is completely gone from the instrument panel; the same procedure applies to the Mercedes A-Class W169.


Posted on 22 September 2025 by ScegliAuto


Related tutorials

How to reset the service indicator light on the Mercedes B-Class
How to reset the service indicator light on the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) In this guide, we will see the information that will allow us to reset the service light for the regular maintenance of the engine oil change for the…
Reset Service Light on a Mercedes-Benz B-Class
Reset Service Light on a Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) In this useful video, you will learn how to reset the service light on a Mercedes-Benz B-Class, model W246, produced from 2011 to 2019. Start the pro…
How to Reset the Service Light on the Mercedes-Benz B-Class?
How to Reset the Service Light on the Mercedes-Benz B-Class?
Mercedes Classe B (2011-2019 / MK 2, W246) The procedure to reset the Service light on the Mercedes-Benz B-Class can be done by turning on the instrument cluster. Use the arrows on the side sp…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos