|
Do it yourself
| |||
| ||||
How to Remove the Cooling Radiator from a Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
How to remove the cooling radiator from a Mercedes C-Class? Open the hood, remove the center grille, then, using a suitable socket wrench, remove the metal bar above the radiator. Lift the car on a column lift and loosen the clamp on the water hose, disconnect the various hoses of the cooling system with pliers. Once free from screws and hoses, you can extract the fan assembly and then the radiator from the engine compartment. Prepare to install the new part in the engine compartment: install the cooling fans, clamps, pins, and various hoses.
Updated on 6 March 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(1993-2000 /
W202)
Regularly replacing the coolant prevents buildup in the radiator. Position a container under the radiator to collect the old coolant, then locate the…
Mercedes Classe C
(2000-2007 /
W203)
.. replace the heater radiator of the Mercedes C-Class. First, we get on board the cabin and start removing all the covers of the central tunnel, unscrewing.. …
Mercedes Classe C
(2007-2013 /
W204)
.. the coolant or antifreeze in the Mercedes-Benz C-Class. First, open the front hood and pull the lever located at the bottom to release the hood latch;.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |